Many years of Progressive Die and Transfer Press machinery design experience.

Willing to aid with Checking or Detail drafting

Available for immediate employment

No relocation restrictions (just need to make the finances work) I do however own a home in the Rockford IL area.

CONTRACT RATE: 27 - 33 per hour
PERM RATE: 25-28 per hour

Mechanical Engineer - Pro/E Wildfire 3.0 and Pro/MECHANICA, Pro/SHEETMETAL, cableing, and Pro/SURFACE with ISDX. Has both 2001 and detail drawings experiance. 7000 hrs of Pro/ENGINEER

Working for a manufacturer of cellular base station equipment but LOOKING!
perm rate: 60 K
contract rate: $32 to $35 per hour

Pro/E Wildfire 3.0 experience with Pro/SHEETMETAL and surfacing emphasis.

BE Mechanical Engineering from Vanderbilt University. Innovation strategist with stong skills in Pro/E Wildfire 3.0, Pro/SHEETMETAL and Pro/SURFACE Currently on assignment in South Carolina

LOOKING!
Perm rate: $60 - 70K per year
Contract rate: $35 plus per hour
Available for relocation anywhere

perm rate: $42 - 52k
contract or freelance: $23 plus per hour

LOOKING! Open to relocate

Engineering Graduate from Kaunas University of Technology in Lithuania with Bachelor degree in Mechanical Engineering. Experience with Pro/E Wildfire 3.0, Pro/SHEETMETAL and some Pro/SURFACE

LOOKING!
perrm rate: $46k or more per year
contract rate: $25 plus per hour
Will consider contract or permanent job with a sixty mile radius from Chicago.

perm rate: $40k or more per
contract rate: $20 plus per hour

LOOKING! Willing to relocated to any part of the country.

Graduate from Michigan State University in Lansing Michigan with a BA degree in Telecommunication. Experience learning Pro/E Wildfire 2.0, Pro/SHEETMETAL,Pro/SURFCE, detail drawings.

perm rate:35-40K per year
contract rate: $17-20 per hour
Looking for employment in the

LOOKING! Willing to relocated to any part of the country.

perm rate: 35-40K per year
contract rate: $17-20 per hour

LOOKING! Willing to relocated to any part of the country.

Degreed Mechanical Engineer from University of IL, Urbana-Champaign with experince in Plastic part design and Software evaluation. Pro/SHEETMETAL, light Pro/SURFACE use and Mechanisms.

Freelancing at deepLABS but interested in contract assignment
perm rate: 40-50K per year
contract rate: $22-24 per hour
Looking for employment in the Chicago-land area.

perm rate: 50-60K per year
contract rate: $25-28 per hour

LOOKING! Willing to relocated to any part of the country.

Degreed Industrial designer with Pro/ENGINEER, Pro/SURFACE ISDXand Pro/SHEETMETAL experience. Pro/PHOTORENDER and Photolux, Photoshop, Illustrator and hi level concept sketching.

Freelancing at deepLABS but interested in contract assignment
perm rate: 40-45K per year
contract rate: $21-24 per hour
Willing to relocate to any part of the United States.

perm rate: 50-60K per year
contract rate: $25-28 per hour

LOOKING! Just looking for job in Michigan

Pro/ENGINEER, Pro/SURFACE, Pro/CABLE, Pro/SHEETMETAL, and ISDX experience.

perm rate: 40-45K per year
contract rate: $30 per hour

LOOKING! Willing to relocated to any part of the country.

LOOKING! Willing to relocated to any part of the country.
perm rate: 50-55K per year
contract rate: $24-28 per hour

Willing to relocated to any part of the United States

Bachelor of Science Mechanical Engineering from Michigan Tech in the upper peninsula. Pro/SURFACE, Mechanism, Pro/MECHANICA, Pro/CABLE

Working at deepLABS but interested in contract assignment
perm rate: 35-42K per year
contract rate: $21-24 per hour
Looking in and the midwest

AutoCAD background with drafting experience. Pro/SURFACE, Pro/SHEETMETAL and Pro/CABLE experience

Working at Butler in Decatur!
perm rate: 35 K per year
contract rate: $18 per hour

Bachelor of Science Mechanical Engineering from IIT in Chicago. Hi Mechanical aptitude. Mechanic. Pro/SURFACE, Pro/SHEETMETAL, Solidworks

Looking
perm rate: 35-42K per year
contract rate: $18-21 per hour
Looking in and around Peoria, Chicago and the upper midwest

Design draftsman experienced many phases of product development - from initial concepts to final production.

Working thru Butler International at Caterpillar in Peoria
perm rate: $45 to 50 K per year
contract rate: $24 - $26 per hour

Industrial Designer with Alias Studio and a small bit of Pro/ENGINEER experience in terms of import functions. Southern

STILL AT SOUTHERN enrolled in ID program
Rate will be from 15 to 20 per hour

Degreed Mechanical Engineer from the University of Illinois Chicago (UIC) - Pro/E Wildfire 2.0 - Pro/SURFACE - FEA - Pro/SHEETMETAL - ISDX

LOOKING!
perm rate: $45 to 55 thousand.
contract rate: $25 - $30 per hour

Designer with Pro/ENGINEER experience. Pro/SURFACE and Strong Drawing skills
complimented with 18 yrs of experience

Working thru Butler International at Caterpillar in Peoria
Rate is at or around $20 to $35/hr

Degreed Biomedical Engineer - Pro/E Wildfire 2.0 - Pro/SURFACE -Pro/SHEETMETAL - ISDX

Working thru Butler International at Caterpillar in Peoria
perm rate: $45,000
contract rate: $25 - $30 per hour

Designer - Pro/E Wildfire 2.0- Pro/SURFACE Pro/SHEETMETAL- ISDX-AutoCAD- Photoshop

LOOKING!
perm rate: $45,000.00
contract rate: $30 per hour

Industrial Designer-

Working as a designer in Mexico
perm rate: 60 K
contract rate: $32 per hour

Mechanical Designer - 10+ years sheetmetal fabrication and electrical schematics. 2d and 3d Library development. Pro/E Wildfire 1.0 and 2.0- Pro/SURFACE Pro/SHEETMETAL- Autocad - Microstation Over 3500 hours in Pro/E

Working in IL
perm rate: $70,000.00
contract rate: $40 per hour

Design Engineer with over four years experience. Proficient in Pro/ENGINEER Wildfire 2.0 also experience with FEA

LOOKING!
perm rate: 60 K
contract rate: $32 per hour

Contracting but LOOKING!
perm rate: 80 K per year
contract rate: $35 to 50 per hour

Mechanical Engineer - Pro/E Ideas and AutoCAD experience. Wildfire 2.0 Pro/MECHANICA, Pro/SHEETMETAL and Pro/SURFACE with ISDX. some 2001 experience.

Working At Design Engine as an instructor currently not looking.
perm rate: 44 K
contract rate: $26 to $28 per hour

Working thru Butler International at Caterpillar in Peoria
perm rate: 55/65 K
contract rate: $30/$35 per hour

Contracting but LOOKING!
perm rate: 55/65 K
contract rate: $30/$35 per hour

Mechanical Designer . Foundry + Sheetmetal with manufacturing experiance.1600 hours on Pro/ENGINEER Wildfire. Pro/SHEETMETAL

LOOKING! Rate is at $22 plus per hour.
37 K annual salary

Electrical Designer. Background in electronics, hardware/software and design. 1600 hours on Pro/ENGINEER Wildfire

Mechanical Engineer. Sheetmetal and manufacturing with 2100 hours on Pro/ENGINEER Wildfire. Pro/SHEETMETAL and PDX

Working at a Chicago manufacture

Industrial Designer. Background in lighting and space planning. Strong Pro/SURFACE and concept sketching skills.

Design Drafter. Chicagoland for now. 3400 Hours on Pro/ENGINEER Wildfire 2.0 Will consider any job in the USA. Technical Graphics Degree from Perdue

Detail Drafter. Chicagoland for now. 1400 Hours on Pro/ENGINEER Wildfire 2.0

resume

Took a job at Caterpillar to start in May 2005!
perm rate: 46/52 K
contract rate: $24/$29 per hour

Mechanical Engineer - Pro/E Wildfire 2.0 and Solidworks and AutoCAD + Pro/MECHANICA, Pro/SHEETMETAL and Pro/SURFACE with ISDX.

Working using Solidworks!
perm rate: 56K/60k
contract rate: $26 to $29 per hour

Working at a Chicago furniture design Firm but still looking
perm rate: 45 K
contract rate: $23 per hour

Mechanical Engineer - Pro/MECANICA - FEA, Pro/SHEETMETAL and Pro/SURFACE.

Caterpillar thru Volt Emisions Group
perm rate: 44 K
contract rate: $19 to $24 per hour

Assignment at Caterpillar eServe
perm rate: 66 K per year
contract rate: $40 per hour

Mechanical Designer - model making and sheetmetal experience. Product design experience spans multiple product design firms. Pro/SHEETMETAL and Pro/SURFACE and Solidworks

Working
perm rate: 44 K
contract rate: $19 to $24 per hour

Working in MN
perm rate: 60 K
contract rate: $40 per hour

LOOKING!
perm rate: $22/hr
contract rate: $26 per hour

Designer with Pro/ENGINEER experience. Pro/SURFACE and Strong Drawing skills
complimented with 18 yrs of experience

Working thru Butler International at Caterpillar in Peoria
Rate is at or around $27 to $35/hr

Working
Rate is at or around $60,000 salary

Design Engineer with 6500 hours of Pro/ENGINEER. Recently took the three week surfacing comprehensive workshop

Working
perm rate: $40/hr
contract rate: $45 per hour

resume < contractors resume
resume < permanent resume

Mechanical Engineer with 10 years + experience with Plastics and manufacturing at Motorola. (plastics expert) Notice the two resumes to the left.

Working (back at Motorola) Contractors rate is at or around $35/hr to $45 per hour.

70,000 to 80,000 for permanent hire

Designer with Heavy Equipment experience. Willing to relocate to any part of the country. 7000 Hours on Pro/ENGINEER Currently working in D.C.